Creative Stamping with Brush Pens

Make creative Stamp Images using water-based Brush Pens

Stamps are brilliant for applying wonderful motifs to a beautiful background. You might already have experience in handlettering or painting and want to expand your creative skills. Stamping is a great opportunity for showcasing beautiful motifs, even if you don't have a lot of experience in drawing. Read here what you need to watch out for with stamping and what colours you can use to get great results.


These are the techniques used in Stamping

With stamping there are lots of different techniques that you can use to realise different results.

Coat the stamp with the ABT Dual Brush Pen and stamp it

Slide the brush tip of the ABT Dual Brush Pen lightly over the stamp relief and press the stamp onto the paper.

Watercolor the background first, then stamp the outlines on top

Before stamping on a watercolor or printed background, make sure the ink is completely dry before you carry on working.

Stamp the outline, then color in

If you use waterproof colour on stamped outlines, the ink will not dissolve during subsequent colouring with water-based Brush Pens. This is how you’ll get the cleanest results.

Stamp the outline and watercolour using the brush tip

For a delicate watercolour character, you can colour the outline using the colourless Blender for Brush Pens or a brush. First add some colour to the Blending Palette and then use the blender or Brush Pen to take up the colour. You can now apply it the paper. In this way, it will appear more subtle than when directly applied.

Edit the outline using the brush

It can also look very nice to edit the stamped outline directly with a wet brush, so that the whole stamp image is given a watercolour character.

Mask foregrounds to create spatial depth

To create a spatial effect, you can also work in several layers. First stamp the foremost motif onto an additional thin sheet of writing paper and cut it out. This figure is your mask. Now stamp your paper and let the impression dry. Lay the cut out stamp mask exactly on the stamp impression. Then you can continue stamping without stamping over the first motif. If you have several levels, cover everything that you have already stamped in the same way before you continue stamping.


Which material is suitable for stamps and how are they used?

Materials made of rubber, silicone or linoleum are suitable for stamps. Ready-made stamps are available in an abundance of motifs and all kinds of sizes. They are often already attached to a carrier material and ready for use. Flat, flexible rubber stamps can be placed on a special acrylic plate to which they will adhere. After use, you can simply pull the stamp off again and use the acrylic plate for the next stamp. You can also combine stamp motifs to produce larger images. Some stamps have a so-called endless motif which you can continue to apply at the edges of each stamp impression and therefore continue stamping endlessly. This is a technique you can use to e.g. frame pages.

Water-based colours are suitable for stamping

Stamping inks should be water-based so that they do not affect the stamp material. Alcohol-based inks can attack or even dissolve the rubber stamp.

There are special stamping inks and pads that you can use. If the stamp is not large, press the stamp onto the ink pad using even pressure and then onto the paper. If the stamp is bigger than the stamp pad, do this in reverse order: pick up the stamp pad in your hand and use it to coat the stamp, which you then press onto the paper.

You can also work without a stamp pad and use pens instead. Water-based ABT Dual Brush Pens are particularly suited to this purpose.

You can simply coat the stamp with the ABT Dual Brush Pens – but make sure that you do not hold the pens vertically, instead coat the stamp using the fibre tip. This way, you will protect the shaped brush tip of your Brush Pens. Be careful: The colour dries very quickly. You can blow on it again before stamping or moisten it with the Blending Mister to give it a watercolour look.

This is how to build your own individual one-off stamp pad

You can easily make your own one-off stamp pad using the ABT Dual Brush Pens: apply some paint to the Blending Palette or film using the brush tip of the Brush Pens and mix the colours as desired. If you notice that the colour is too dry, you can add a bit of water using the Blender. This will result in a more effective watercolour effect when stamping.

Always clean your stamps immediately after printing

After you've used it, you should clean the stamp right away. If you use water-based colours for stamping, this is easy. Simply press the stamp down on a piece of paper again after you’ve finished using it. You can also have a soft, wet cloth lying on your worktable and press the stamp directly into the cloth. When you've finished working, clean the stamp under warm running water. You can also use a mild detergent if you need to. Also clean the stamp between individual stamping sessions so that the outlines come out clean.

Tip: If you’ve used black with the stamp, you should always clean the stamp immediately.

How to create your own stamp

There are some amazing stamps available to buy – but would you like to make your very own stamp? No problem – basically you can use any soft, non-absorbent material and make a stamp from it. Linoleum sheets or old erasers are particularly suitable. You can also buy larger rubber plates that you can cut a stamp out of. Draw the motif on the stamp material and cut it using hollow knives suitable for cutting lino. Leave only the parts that should remain visible as a contour when stamping.
 

What’s really important is: Stamps must be made of non-absorbent material, as the ink should sit on top of the stamp and not be absorbed into it.

Trace the contours? This isn't necessary because the character of the stamp is all the more accentuated by irregularities

Sometimes the stamp does not touch the paper evenly, so the outline is not closed everywhere. However, this does not have to be a disadvantage and can even emphasize the character of the technique. This means you don't necessarily have to trace the outline in afterwards. However, if you stamp on very rough paper, the print may become particularly irregular. It is therefore best to do a test print first in order to become familiar with the properties of the paper.

I sometimes trace the contours to create a shadow effect. It can look very effective. In this case, it’s best if the stamp and drawing ink are the same colour. This is why I like to work with Brush Pens for stamping.

Melanie Robinet, Lettering-Artist and Illustrator

3D effect with glue and powder after stamping

Depending on the stamp motif, it can enhance the image if you put some glue on one part of the motif and sprinkle it with glitter or coloured powder. This works wonderfully with the MONO AQUA Liquid Glue or the MONO MUTLI Liquid Glue. If, for example, you sprinkle glitter on the pistils of flowers, you will get a beautiful 3D effect. For very fine lines that you want to sprinkle with glitter, the MONO Glue Pen is ideal because you can apply it very thinly.

OUR PRODUCTS

18 products

ABT Dual Brush Pen
Brush Pen & Marker

ABT Dual Brush Pen

With two tips (brush tip + fine tip) for maximum creativity. Water-based colors for handlettering, watercoloring and illustrations. Available in 107 colors + Blender.
Available in various colours
€3.90
ABT Manga set
Brush Pen & Marker

ABT Manga set

ABT Dual Brush Pen with two tips for maximum creativity. Water-based colours for colouring your mangas. Two different sets available.
Available in various colours
€39.00
ABT set of 12
Brush Pen & Marker

ABT set of 12

With two tips (brush tip + fine tip) for maximum creativity. Water-based colours for handlettering, watercoloring and illustrations. 3 different sets of 12 available.
Available in various colours
€46.80
ABT set of 18
Brush Pen & Marker

ABT set of 18

With two tips (brush tip + fine tip) for maximum creativity. Water-based colours for handlettering, watercoloring and illustrations. 4 different sets of 18 available.
Available in various colours
€70.20
ABT set of 6
Brush Pen & Marker

ABT set of 6

With two tips (brush tip + fine tip) for maximum creativity. Water-based colours for handlettering, watercoloring and illustrations. 5 different sets of 6 available.
Available in various colours
€23.40
Fudenosuke Neon
Brush Pen & Marker

Fudenosuke Neon

Vibrant lettering and dynamic illustrations with variable stroke widths thanks to flexible brush tip. Six different neon colors available.
Available in various colours
€2.90
Fudenosuke Neon set of 6
Brush Pen & Marker

Fudenosuke Neon set of 6

Vibrant lettering and dynamic illustrations with variable stroke widths thanks to flexible brush tip. Six different neon colors available.
€17.40
MONO AQUA Liquid Glue
Glue

MONO AQUA Liquid Glue

Extremely versatile with its two tips – a fine tip for precise gluing and a wide tip for large-area application. Washable, transparent adhesive for powerful gluing on a range of materials.
€4.30
MONO Maxi Power Tape
Glue

MONO Maxi Power Tape

For endless and extra powerful gluing: Refillable and with unusually long 16 meter-tape. Neat, accurate and extra powerful gluing on paper: Cardboard, paper, photos, glass and many other materials.
€5.15
MONO Maxi Power Tape refill
Glue

MONO Maxi Power Tape refill

Refill cartridge for PN-IP with extra long 16-metre tape. Neat, accurate and extra powerful gluing on paper: Cardboard, paper, photos, glass and many other materials.
€4.05
MONO MULTI liquid glue
Glue

MONO MULTI liquid glue

Extremely versatile with its two tips – a fine tip for precise gluing and a wide tip for large-area application. For permanent or removable gluing on a range of materials.
€5.20
MONO PN-MK
Glue

MONO PN-MK

Stay flexible - thanks to the PN-MK with removable adhesive tape. Neat, accurate and powerful gluing on paper: Photos, paper, tapes, styrofoam and many other materials.
€5.15
MONO PN-MK refill
Glue

MONO PN-MK refill

Refill cartridge for PN-MK with removable adhesive tape. Neat, accurate and powerful gluing on paper: Photos, paper, tapes, styrofoam and many other materials.
€4.05
MONO PN-US
Glue

MONO PN-US

Handy size and ergonomic shape for pleasant and accurate gluing. Neat and powerful gluing on paper: Photos, paper, tapes, styrofoam and many other materials.
€3.56
MONO WPC
Glue

MONO WPC

The glue stick for fine work: Glues even the smallest details with its extra-fine tip. Neat and accurate gluing on paper: Cardboard, paper, tapes, glitter, sequins and many other materials.
€4.40

Step-by-step instructions – How to design your own greetings cards

Making your own greetings cards isn’t that difficult. You will need paper that weighs 250 grams, such as Bristol paper, which is ideally suited to cards. Cut the paper to the desired size and fold as needed.

  1.  Apply some paint from the brush tip of two (or more) coordinating ABT Dual Brush Pens onto the Blending Palette or film. A blue tone and a red tone, for example, mix beautifully with a purple tone. Then spray some water on top using the Blending Mister. Place the wet side of the film on the paper. This will create a very expressive one-off print – a so-called monotype.
  2. Once the background is dry, apply the stamp to the watercolour background. This could be an outline or something flat – as long as the surface is dry, the paint will set over it.
  3. If you like you can also write a handlettered word or a saying on it or colour in and stamp the individual characters.
  4. With a large motif stamp that is in the foreground, it’s better to stamp using a pigmented ink so that the outline does not dissolve when you use other shades for colouring. With the Blender you can pick up different colours from the Blending Palette and paint them softly into the outline. In this way, you can also create beautiful transitions with a 3D effect that appears very vivid.

And your individual card is now ready!

 

Summary:
With stamps you can create great pictures, which you can further edit according to your needs and wishes. With Brush Pens you can colour your stamps wonderfully and then paint the outlines with water.

Have fun – and stay creative.